Thingiverse
ASRock A300 Optional Case
by n3verless
4
Downloads
2
Likes
0
Makes
Because of two 60mm Noctua Fans and a few hours of free time i decided to create a optional Case for the Asrock A300 (it will fit the X300 also!).
The Case consists of two halves that are connected with M4 Brass Standoffs. Every mounting hole needs Male-Female two 15mm, one 10mm and one 10mm Female-Female. Also you need a 18mm Push Button for the On-Off-Switch. It is possible to mount the original USB2-Front-Expansion.
With this case you are going to loose the Onboard-Front-IO! The only thing that speaks for this case is the excelent cooling.
The Case consists of two halves that are connected with M4 Brass Standoffs. Every mounting hole needs Male-Female two 15mm, one 10mm and one 10mm Female-Female. Also you need a 18mm Push Button for the On-Off-Switch. It is possible to mount the original USB2-Front-Expansion.
With this case you are going to loose the Onboard-Front-IO! The only thing that speaks for this case is the excelent cooling.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
