Assembly Tolerance Test 16g Material Small and Complete Tolerence tests

用来测试打印配置公差的模型，仅需16g材料，建议改变打印配置或启用新耗材的时候打印一份。 测试插销为一头圆形一头方形，分别测试不同形状的装配间隙。 测试内容包括：1、正方形孔洞间隙测试。2、圆形孔洞间隙测试。3、与M4螺丝的配合（基准直径4mm）。4、与M4螺母的配合（基准六边形内接圆直径7mm）。5、从0到0.7mm的接缝测试，最小接缝可从板侧面的刻度条读数。 A model for testing printing tolerance configurations, requiring only 16g of material. It is recommended to print a copy when changing printing configurations or using new materials.The test pin has a round shape on one end and a square shape on the other end, testing the assembly gaps for different shapes. The test includes:quare hole gap test.Round hole gap test.Fit with M4 screws (reference diameter 4mm).Fit with M4 nuts (reference hexagon inscribed circle diameter 7mm).Seam test from 0 to 0.7mm, with the minimum seam readable from the scale bar on the side of the board.