Aston Martin Logo

Aston Martin Logo in mirror to be engraved and cut out of acrylich with a mirror finish. The key thing to know is that you must engrave from the back of the mirror acrylic. Diode lasers, which operate in the blue light spectrum (~450nm), are reflected by the mirror coating on the front surface. 🛠️ Preparation Material Inspection: Ensure your mirror acrylic has a protective film on both the front (reflective side) and the back (the side you will engrave). If there is no film on the back, you can apply a layer of masking tape to help with cleanup.Safety First: The Bambu Lab H2D should have safety windows, but never look directly at the laser beam or its reflection. Always keep the enclosure door closed and use proper ventilation. Acrylic fumes can be toxic, so good ventilation (exhausted outdoors or through a proper filtration system) is critical.Positioning: Place the mirror acrylic in the H2D's work area with the reflective/mirror side DOWN and the gray/painted backing layer UP (t