Astronaut hueforge

Project: astronauta sol.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140.63x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA smatfil White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.