MakerWorld

Other Miniatures

AT-ST

by jujuDab0SS_print · Other Miniatures

162 Downloads

93 Likes

125 Makes

this is an AT-ST walker from star wars. this easy to assembly fun to play with AT-ST models is one of the most poseable out there. takes about 1 hour and 5 minutes and is super poseable and articulated. carful with the toes if you use pla basic they are fragile.

Star Wars Star wars at st atst at-st walker Robot imperial battlefront Flexi articulated cool fun stop motion

Category

Other Miniatures

Source

MakerWorld

Published

12.03.2026

Updated

18.05.2026

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does AT-ST need supports when printing?

Nope — AT-ST is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print AT-ST?

According to the design notes, AT-ST takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is AT-ST available in?

AT-ST is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is AT-ST free to download?

Yes, AT-ST is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

AT-ST

Similar Models

Add to Collection