Athena

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 1.8mm and the Actual Depth is 1.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Green
At layer #5 (0.48mm) swap to Gray
At layer #7 (0.64mm) swap to Ivory White for the rest.

This can be resized on the X/Y axis a little but avoid the resizing the Z access or your colors will be off. Manual swapping is available for non-AMS enabled printers, just add stops in the sliced files at the specified locations.