atomrc dolphin set

1 recomendated PETG
2 asemble GPS mount need superglue
3 motormount filling 100% recomendated. The wood will have to be removed.
4 cage nuts in the backing are glued with superglue and baking soda (for quick drying)
5 CRSF the antenna does not stick out from the bottom )))
6 VTX ATTENTION. I do not know how well the antenna will work in this model. On other models, installing the pagoda upside down works well. Lolipop-type antennas do not work well for me upside down. I recommend using the pagoda antenna. Attention, the antenna will have to be shortened a little in order for it to fit.During tests, the picture flew 3.5 km, the picture is satisfactory
7 ESC There is thermal paste between the mosfets and the aluminum plate! When tested at full throttle at a current of 45A, lasting 10 seconds, the temperature did not rise above 50°C. The air temperature was +1°C. During a calm flight (10-15A), the temperature is about 35°C
8 Additional magnets. The force to open the lid is doubl