ATV (or whatever) Hand Guard

Hand or mud guard for an Arctic Cat ATV or similar, optionally with the cat logo on the bottom part. Designed for easy printing. The shield is divided in a lower and an upper part that is glued together after printing. Brackets can be tightened to the guard with two 10-12 mm metal or wood screws but can be glued in place.
Made for 22 mm handle bar

Print brackets solid.
Shield can be optimized after your liking.

## What you need:
- PETG or similar
- 4 x M4 screws 50 mm length (or Imperial #8, 2 inches)
- 8 washers
- 4 nuts
- Optionally 4 wood/metal screws 10-12 mm length (half inch)
- Super epoxy
- Two or three metal clamps for the glueing phase