Augumon Digimon

Free for personal printing use only. Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Greymon and Tai print below, available EXCLUSIVELY on Patreon!Project: Augumon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 188.03x235mm in sizeYou may print at higher layer heights below the Base Thickness of 1.2mmThe Max allowed Thickness is 3.36mm and the Actual Thickness is 3.2mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 7 unique filamentsSwap Instructions: