Auto Guide Cam Case (AR0130 Sensor)

Guide camera case for the AR0130 sensor, the B&W version. This is based on the original design by masutokw. His would work just fine for most people. I needed to make a few changes though to suit my needs.

I had to model it from scratch since all i could open was the .stl files. So the design is inspired by his, but dimensions will likely be different is most areas. The main differences are: I eliminated the need for hardware other than the 3 m3 bolts needed to secure the front cap. Pillars and standoffs were added for the sensor to sit securely in place without the need for screws. I added a step to the 1.25" tube in order to add a standoff distance to clear the thumb screws on my guide scope. The opening for the wiring was shifted to line up with the plug on my sensor. The width of the tube was increased to 1.24" to fit more securely. Also, i changed the shape of the opening for the sensor and tightened the tolerances so that the opening will center the sensor.