AutoConnect MacBook Pro 14" Mount

Low‑profile, single‑part under‑desk holder with automatic connecting thunderbolt port designed for the M1 MacBook Pro. The laptop slides on 3.3 mm felt pads (“Filzgleiter”) for protection and smooth docking. A cut‑out at the rear of the print leaves space for a Thunderbolt/USB‑C plug; fix the cable in that opening with hot glue from behind so the connector lines up every time. I did not test later MacBook Pro 14" What it isOne big printed tray that screws under the desk.Inside contact surfaces are lined with 3.3 mm Filzgleiter (felt furniture pads).Rear pass‑through/relief hole for the cable; the cable is hot‑glued in place from the back of the part (no separate printed cable channel). InstallationImportant: Apply the upper felt pads after the holder is screwed to the desk.Position and mark the holder under the desk; check clearance to the frame.Drill pilot holes and screw the holder in place. Ensure screws won’t poke through the desktop.Degrease the tray surfaces, then apply the 3