Thingiverse
Engineering
Go to Model
Auxiliary Leveler Ramp
2
Downloads
1
Likes
0
Makes
Auxiliary ramp for leveler, this serves to guide the sheet from the uncoiler to the leveler. Later I will raise the uncoiler shown in the image, until the leveling line is finished.
For the mobile roller two are required:
https://www.thingiverse.com/thing:5821964
Some of the assemblies require contact glue, in addition the black rollers were used TPU, this to be able to drag the paper or cardboard more easily.
In addition, 10mm long M3 screws, M3 nuts and a Pololu type motor were used. Several pieces only need to be mirrored. So I don't include them.
If you have any questions, do not hesitate to send me a message and I will gladly assist you.
Assembly and operation video.
https://youtu.be/F4k1TvsiBIg
For the mobile roller two are required:
https://www.thingiverse.com/thing:5821964
Some of the assemblies require contact glue, in addition the black rollers were used TPU, this to be able to drag the paper or cardboard more easily.
In addition, 10mm long M3 screws, M3 nuts and a Pololu type motor were used. Several pieces only need to be mirrored. So I don't include them.
If you have any questions, do not hesitate to send me a message and I will gladly assist you.
Assembly and operation video.
https://youtu.be/F4k1TvsiBIg
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
