Avatar, Neytiri

The new Avatar movie - Fire and Ash is coming out in December 2025. Perfect timing to launch a mini Avatar collection in those vibrant blues. More Avatar available - if not uploaded to MakerWorld, it will be on Patreon. Avatar, NeytiriPictures shown are printed in an 0.4mm NozzlePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Cyan At layer #12 (1.12mm) swap to White At layer #16 (1.44mm) swap to Red At layer #19 (1.68mm) swap to Yellow for the rest. To print more than 4 Colors in 1 AMS, Use this sample for this print:Load filaments Black in slot 1, Cyan in slot 2, White in slot 3, and Red in slot 4When c