Ave Fenix Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm   The Model is 133.36x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used:     PLA Smart Recycled Black Transmission Distance: 0.5     PLA Smart Recycled Red Transmission Distance: 4.4     PLA Smart Recycled Yellow Transmission Distance: 9.3     PLA Smart Recycled Orange Transmission Distance: 5.7 This print uses 4 unique filaments   Swap Instructions:     Start with Black     At layer #7 (0.64mm) swap to Red     At layer #11 (0.96mm) swap to Yellow     At layer #20 (1.68mm) swap to Orange for the rest.