Thingiverse
Avengers Litophane
par marcocerone1
0
Téléchargements
0
Likes
0
Makes
My Avengers Lithophane printed on the A1 with nozzle 0.4 (recommended 0.2).
Settings
first layer height to 0.15mm;
Top & Bottom Shell Layers to 3;
infill to '100% Rectilinear;
Light Guide is Optional ( I didn't use it)
Settings
Filament type： PLA Basic - Jade White
Wall loops: 5
Top shell layers: 5
Bottom shell layers: 5
I have used a chip USB LED strip for the back light (cut as required). Some soldering is needed.
As alternative can be used the standard Bambu LED panel.
Settings
first layer height to 0.15mm;
Top & Bottom Shell Layers to 3;
infill to '100% Rectilinear;
Light Guide is Optional ( I didn't use it)
Settings
Filament type： PLA Basic - Jade White
Wall loops: 5
Top shell layers: 5
Bottom shell layers: 5
I have used a chip USB LED strip for the back light (cut as required). Some soldering is needed.
As alternative can be used the standard Bambu LED panel.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
