AVP Hueforge

Hueforge of the first AVP film cover. I have produced a print in white and one in glow in the dark green, both look amazing. If you wish to print the green/glow version, then swap the white out for a light green or glow filament. The .3mf comes pre loaded with the correct settings and filament swap times.If you are using 1 AMS the easiest way to do this is to slice the file with the first 4 colours, and then once teh black has finised printing you swap it out for white.If you do not have an AMS then change the colour swaps to a pause and manually change the filament and resume the print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 135.25x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA eSun Silver Transmission Distance: 1 PLA Sunlu Purple Transmission D