AVP Requirem Poster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.03x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.76mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #002a96 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cobalt Blue At layer #9 (0.8mm) swap to Cyan At layer #11 (0.96mm) swap to Jade White At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to Red for the rest.