Thingiverse
AWP Bipod display mod
von Laz_D
7
Downloads
10
Likes
0
Makes
The part in main picture is attached 180' rotated and cant 'fold' forward. This can be glued facing the correct way.
Part of a major remodel of the AWP that can be used for a stable bench display of the rifle from CS:GO.
They are .3mf files to make it easier if you wish to merge the left/right legs and print as 1.
This is a split from the original AWP_2.stl. The legs cut and rotated.
Use the original AWP_8.stl for the mushroom like feet ends.
NB: the barrel part has been hollowed, so if you like just drop a cylinder down in to it if you want a solid piece.
Also check your scale, as I recall, this was for a rifle print of 60cm and is the same sized part as original.
Part of a major remodel of the AWP that can be used for a stable bench display of the rifle from CS:GO.
They are .3mf files to make it easier if you wish to merge the left/right legs and print as 1.
This is a split from the original AWP_2.stl. The legs cut and rotated.
Use the original AWP_8.stl for the mushroom like feet ends.
NB: the barrel part has been hollowed, so if you like just drop a cylinder down in to it if you want a solid piece.
Also check your scale, as I recall, this was for a rifle print of 60cm and is the same sized part as original.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
