Cults3D
Fashion
Model downloaden
Axe head for Celtic Axe
0
Downloads
1
Likes
0
Makes
Axe head for Celtic Axe
Connects to other modules using a twist-lock system (pin into socket + twist). No glue or additional hardware required. Part of a modular system – compatible with other modules for customizable configurations and easy storage.
**Head assembly:**
The head consists of two mirrored halves connected with 9 press-fit pins. Insert the pins from one side (a dedicated tool can be used). Pins should fit tightly; if necessary, adjust their scale in X/Y by ±0.1 mm. After joining both halves, install the rings to lock the structure. The head is designed as a permanent assembly.
Requires build plate: ~223 × 233 mm (diagonal placement)
**The file includes only the head**; all other components required to assemble the axe are available separately.
**Check other modules and build your own configuration.**
Connects to other modules using a twist-lock system (pin into socket + twist). No glue or additional hardware required. Part of a modular system – compatible with other modules for customizable configurations and easy storage.
**Head assembly:**
The head consists of two mirrored halves connected with 9 press-fit pins. Insert the pins from one side (a dedicated tool can be used). Pins should fit tightly; if necessary, adjust their scale in X/Y by ±0.1 mm. After joining both halves, install the rings to lock the structure. The head is designed as a permanent assembly.
Requires build plate: ~223 × 233 mm (diagonal placement)
**The file includes only the head**; all other components required to assemble the axe are available separately.
**Check other modules and build your own configuration.**
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
