Axial rr10 Bomber mini backhalf

UPDATE - I added a new version of the mini backhalf. Call it v3. This one supports installing the Axial swaybar in the rear of the chassis. I've installed Ryft axles in my Bomber and the wider link mount spacing didn't work well with the swaybar mounted in the stock location. This should work fine with AR60 axles as well.

I made this back half for my bomber to allow for more up-travel in the suspension. Side result is that it looks pretty cool.

This does require trimming 2 spots on either side of the chassis that will no longer be used. I made it to include the original fuel cell, but that does require trimming the mount feet off of the cell to account for the thickness of the parts. I used the original screw for the front mount on the cell, and a longer screw and nut for the rear mount. If you leave the cell out, I would at least use a screw and nut to bolt those points together. Optionally, you can make spreaders like mentioned below.

I used aluminum tube (6x2.5mm, t