aztec man

Aztec man hueforge. no ams needed Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 147.45x179mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Gray At layer #10 (0.88mm) swap to White for the rest.