Babyhawk Custom Frame

This is a full custom frame for the original babyhawk. It supports a larger range of motors, but is still a 2.3" prop size. You should be able to just move your electronics over. If you do get larger motors, the ESCs are tight, but do fit. You just need to do the under/over method for the wires. I passed the wires thorugh heat shrink under the ESC, then back through the shrink over the ESC and soldered them to the motor pads coming from the back of the ESC. When shrunk up and ziptied to the arms it works great. You do loose some heat dissipation, so if you're running a setup that pushes the limits of the 6A stock ESCs, you might have some trouble. Since this is a 20x20 stack though, you can always switch to a 12A 4-in-1 with a 20x20 mount, and it should work fine. The 3D printed parts here have been designed for robustness rather than weight savings etc, but the rest of the frame being carbon and minimalist still keeps the combined weight low. The carbon plate also has mount holes fo