Thingiverse
Back Flat Remix Snowman
por Chris480
0
Descargas
1
Likes
0
Makes
This is a REMIX , i made modifications , the bottom and the back is flat , so can print easy without any supports .
sources : https://www.thingiverse.com/thing:1951963
in printing position on the back i scale it up to , X 143.82mm Y 227.45mm Z 122.47 .
the original ladder in a standing position was X 47.94mm Y 53.36mm Z 80mm
the original size is , W 47.94mm D 53.36mm H 80mm
i used white pla , and paint red and black Acrylic paint , and i used 3D pen and orange pla , and black pla for the eyes, mouth, and pimples .
i use a 0.6 nozzle and layer résolution 0.3 , infill 5% , 10% or more , more that increase print times .
try in your slicer the infill between 5% and 10 % see How long does it take to print ? .
share your pictures print .
enjoy ..
sources : https://www.thingiverse.com/thing:1951963
in printing position on the back i scale it up to , X 143.82mm Y 227.45mm Z 122.47 .
the original ladder in a standing position was X 47.94mm Y 53.36mm Z 80mm
the original size is , W 47.94mm D 53.36mm H 80mm
i used white pla , and paint red and black Acrylic paint , and i used 3D pen and orange pla , and black pla for the eyes, mouth, and pimples .
i use a 0.6 nozzle and layer résolution 0.3 , infill 5% , 10% or more , more that increase print times .
try in your slicer the infill between 5% and 10 % see How long does it take to print ? .
share your pictures print .
enjoy ..
Chris480 también publica en
4 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
