Back To The Future Hueforge

Project: 1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 104.47x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Grey Transmission Distance: 3 PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Grey At layer #16 (1.36mm) swap to White for the rest. Project: 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 103.76x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5This print uses 4