Thingiverse
Household
Go to Model
Backpacking stove stand
1.1k
Downloads
811
Likes
12
Makes
A simple foldable stove stand compatible with most gas canisters (109mm and 90mm).
It seems there is small variations in canisters diameter depending the brand used. You may trimm a bit the legs of print the part a little smaller on the length axis.
Print 3x feet.stl and 1x center.stl
You will need 3 M3x15 screw (M3x12 works fine too).
Screws goes head up, tighten as needed.
Tripod version:
http://www.thingiverse.com/thing:1484798
28/03/2016 uploaded Inventor CAD files
08/09/2016 uploaded improved center V2 part and 100mm short feet (20mm shorter than the original) for best fit in smaller pots
It seems there is small variations in canisters diameter depending the brand used. You may trimm a bit the legs of print the part a little smaller on the length axis.
Print 3x feet.stl and 1x center.stl
You will need 3 M3x15 screw (M3x12 works fine too).
Screws goes head up, tighten as needed.
Tripod version:
http://www.thingiverse.com/thing:1484798
28/03/2016 uploaded Inventor CAD files
08/09/2016 uploaded improved center V2 part and 100mm short feet (20mm shorter than the original) for best fit in smaller pots
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
