Backup Camera Rearview Mirror Mount

***9/8/25***Updated with print profile: This is for one velcro side and one ziptie side each in PETG. I found that running with 2x sides utilizing the zipties the mounts tend to pop off the mirror on very bumpy roads._______________________________________________________________Allows you to attach a modern wireless backup camera on your rearview mirror. You can use cable ties or velcro to mount. I tucked the power cable above my rear view mirror and wired to my uplifter switches. This means I can just swap out the screen if I change something up. The camera side is wired into the marker lights on my camper. There are two versions available: one for velcro and another for cable ties. You will need 2x sides and 2x of either the velcro or cabletie versions. I decided on the cable tie version and used panhead screws I picked up from the local hardware store for under 2 bucks. (M4-0.7mm x 16mm)Print in the orientation provided. Printing in two parts allows for quicker print times and no s