Bad Batch Wrecker Hueforge

Batch Bad - Wrecker Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6 Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Gray At layer #17 (1.44mm) swap to White for the rest.