Thingiverse
Baffles SkyWing Laser GP76
door AKNick
10
Downloads
8
Likes
1
Makes
Engine Baffles for the Skywing Laser with a GP76. Post a Make! Send a TIP! Show your support :)
This design took me a very long time to make being my first attempt. I would be happy to make a set for anyone, just send me a message. There is a few imperfections in the CAD work that show up in the print, especially due to how thin they are. Combined they weigh about 1.5oz and use about 15m of filament.
LH/FRONT takes about 2.2 Hours to Print
RH/REAR takes about 3.2 Hours to Print
There may be some trimming, sanding, and fitting involved to get them just right. Note that fiberglass mold inner layups have some irregularities and buildup that may need to be sanded down as well for the plastic parts to fit right. I would love feedback!
Green PLA is KCamel
Blue HTPLA is Proto-Pasta Winter
This design took me a very long time to make being my first attempt. I would be happy to make a set for anyone, just send me a message. There is a few imperfections in the CAD work that show up in the print, especially due to how thin they are. Combined they weigh about 1.5oz and use about 15m of filament.
LH/FRONT takes about 2.2 Hours to Print
RH/REAR takes about 3.2 Hours to Print
There may be some trimming, sanding, and fitting involved to get them just right. Note that fiberglass mold inner layups have some irregularities and buildup that may need to be sanded down as well for the plastic parts to fit right. I would love feedback!
Green PLA is KCamel
Blue HTPLA is Proto-Pasta Winter
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
