Bald Eagle sketch Hueforge

A Sketch of a bald eagle, made up by Midjourney, that I put through hueforge. This print only uses 4 colors. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #16 (1.36mm) swap to Grey At layer #19 (1.6mm) swap to White for the rest. If you change the scale of a Hueforge, you must disable universal ratio. Only change the x and y axis. Do not change the z axis as that will affect the colors.