Baldrick8 Mount

🔧 Baldrick 8 + Raspberry Pi 4 + Buck Converter + Meanwell PSU MountAfter spending way too long perfecting this instead of working on my light sequences 😅, I finally have a clean and functional mount that ties it all together!🧩 What It FitsBaldrick 8Raspberry Pi 45V Buck ConverterMeanwell PSU🧰 Additional Supplies2 × M4 x 8mm bolts – to mount the print to the PSU4 × M3 heat inserts4 × M2.5 heat inserts4 × M3 standoffs (6×6 mm)4 × M2.5 standoffs (6×6 mm)4 × M3 x 6mm screws – to mount the Baldrick 84 × M2.5 x 6mm screws – to mount the Raspberry PiSpace provided for a 5V buck converter https://www.amazon.com.au/dp/B0D5V5YDC3?ref=ppx_yo2ov_dt_b_fed_asin_title💡 Design HighlightsMounts to one side only to reduce the overall widthMoves the Raspberry Pi away from the edge, allowing easy SD card removal even if the PSU is closeVent holes and raised standoffs to improve airflow and coolingClean cable routing and solid mounting points for all components🧱 Recommended MaterialPrinted in PETG –