Bambu A1 base fixing mount

This is a model I designed for my bambu a1. Because I have a very limited space for my printer setups I designed some base mounts to make sure the printers do not move when printing. These have holes for screws but could be stuck down with double sided tape. They have approximately 5mm gap between the mount and the A1 printer. This is to allow for a 5mm self adhesive gasket to be fitted to the mount to eliminate extra vibration and noise from the printer. This turned out pretty much perfect for my use so thought I would share here. You will need to purchase so EPDM 25mm wide, 5mm thick sponge/gasket. you could probably use a gasket that is not as wide but 25mm would cover the whole part of the mount. This then just needs sticking on the inside of the mount. The gasket needs to be approx 12cm long per mount. Boost MeIf you like this idea I would massively appreciate it. That would definitely encourage me to put more effort into sharing my other creations!Thanks for looking! Happy printi