Bambu Filament Spool - Storage Box

这是一款针对拓竹官方料盘设计的储物盒，储物盒由3部分组成：This is a storage box designed for the Bambu filament spool, the storage box consists of 3 parts:拓竹官方料盘 the Bambu filament spool打印好的抽屉 the printed drawer连接件（本设计默认使用竹牙签，直径大约1.56mm；也可采用耗材丝，不过装配的孔尺寸需要适当调整） Connector (the design uses bamboo toothpick by default , diameter is about 1.56mm. Filaments can also be used, but the size of the holes in the assembly needs to be adjusted appropriately)抽屉款式有4种：There are 4 drawer styles:单层、单格 one layer, one part单层、双格 one layer, two parts双层、单格 two layers, one part双层、双格 two layers, two parts建议首次打印本配置时，先打印一个【单层、单格】试试尺寸是否合适。For the first time, I recommended to print a [one layer, one part] to see if the size is proper. 以下为装配说明：The following is the assembly instructions:装配前，需要将料盘拆开，将其中一个料盘上的“键”剪掉Before assembly, the spool needs to be disassembled and the "key" needs to be cut装配前，用连接件疏通要插入的孔，确保松紧适中Before assembly, unclogging the hole with a connector to ensure proper tightness开始装配 Start assembly装配第一个抽屉和旋转轴 Assemble the f