Bambu Lab - Faster Start - reduce waiting time | G-code trick

Bambu Lab - Faster Start - reduce waiting time | G-code trickBambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the 'wait for bed temp' to a later position since this is an unnecessary delay.Meanwhile the printer can continue with preparations and you safe time on print-duration.To-Do:Go into BambuStudio or OrcaSlicer and search for your printer (should work an all Bambu printers)- click the 'little icon' next to the printer (1)- In the printer settings, click on 'Machine G-code' tab (2)- In the 'Machine start G-code' section (3), scroll down and look for the lines ;===== heatbed preheat ====================M1002 gcode_claim_action : 2M140 S[bed_temperature_initial_layer_single] ;set bed tempM190 S[bed_temperature_initial_layer_single] ;wait for bed temp - Now cut-out (ctrl+x) the following line M190 S[bed_temperature_initial_layer_single] ;wait for bed temp - and pa