Bambu Lab - Nozzle Changing Tool

This is a Nozzle Changing Tool for Bambu Lab P1P, P1S, X1 & X1C with Bambu Lab Logo I also changed the Hotend Bracket so you can now mount the complete hotend without removing the fan previously !!To Disassemble & Assemble a HotendMount the whole hotend with 2 screws on the bracketDisassemble the Fan , Silicone Sock, Nozzle clamp, Heater, Sensor Clean Heater & Sensor (isopropyl alcohol)Remove old Nozzle with Heatbreak !Screw on an new Nozzle with HeatbreakApply some thermal grease to the top of the nozzle or heater & place the heaterApply some thermal grease to the Sensor & place the sensorMount the nozzle clamp and pay attention to the cable routingMount the Silicone SockMount the FanNow you can mount the Hotend in the printer !!! Layer height : 0,2, line width : 0,4Walls 2; top 1,0mm ; bottom 0,6mminfill 15% ; print time ~ 1h 22min Sunlu PLA+ Yellow, Bambu Lab PLA Basic Bambu Green MakerWorld : https://makerworld.com/en/@sweb3791My Models : https://www.printables.com/de/@CB_384764/mo