Bambu Lab P1P Printable Cable Drag Chain

Bambu Lab P1P Printable Cable Drag Chain I created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design https://makerworld.com/en/models/23653 . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent. When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way. Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. Below you can see the difference in sagging with the chains fully extended. Please use https://makerworld.com/en/models/23653 for the rest of the instructions and print files for the complete assembly. This is a 3d printed chain with a lot of moving parts, overtime tol