Bambu Lab Switching Adapter Mount

INTRODUCTIONThis is a simple Bambu Lab Switch Adapter Mount, designed for my P1S Combo (P1S with AMS2 Pro).It comes with cable and PTFE tube holders. PRINTINGI recommend using tree supports (as in my print profile), since they are very easy to remove.Everything was printed with 4 walls, to make sure the parts aren't too weak. ASSEMBLYFor mounting the Bambu Lab Switching Adapter on the back of the P1S, I used two 3mm machine screws with a thread length of 8mm (see Bill of Materials). I think it is best to use them for all the cable and PTFE tube holders too. Only be careful when tightening the screw in the hole that is red arrow pointed in the fourth picture, since there is no thread in printer and overtightening will worsen the situation. Also the holes with blue arrows pointed at them need a spacer placed under them (you can see that there's a recess aroung the threaded hole). Before mounting PTFE tube holders, please insert PTFE tube through the tunnel, don't push it in f