Bambu Lead Screw Cleaning Tool

Please see version 2: I increased the clapping force by 2.5 times and adjusted the thread profile to better fit the contour of the trapezoidal thread profile of a T8 lead screw Press Ctrl + click to follow the link https://makerworld.com/en/models/2028460-t8-lead-screw-cleaning-tool-v2#profileId-2218064 I designed this version of a tool to clean the T8 lead screws of a Bambu Lab printer to use an “Alcohol Prep Pad” that can be found at a local pharmacy or food market. I designed the threads on the tool to have an offset so that pressure is always applied to the lead screw. The threads are also made with a larger 8.5 mm diameter to allow for the thickness of an alcohol prep pad or something similar. If you clamp the tool on the threads without any kind of cleaning pad, you will see that the tool threads are slightly larger than the lead screw thus allowing space for the pad The wall thicknesses of all the sections of the part are designed to create complete unbroken loops. When you set