Bambu X1 Foldable side spool holder with guide

My printer is close to the wall, so I needed a solution that didn't take up a lot of space. I came across this foldable spool holder from @RichardStein_649422, which is exactly what I needed. However, I wanted a filament guide. So I took the guides of this spool holder from @BastR and adapted the foldable arm to include the guide. I also took the opportunity to rework the cylinder, as the original one didn't fit properly in the parts. The new one is thinner and has a collar to lock it in place. What is included Arm (Printed with supports at the magnet holder and hinge) Spool holder (2 sizes: most spools will fit right on the shorter one) Cylinder (To lock the holder in the arm, insert it from above) Filament guide (3 variations: with a single hole, with a PC4-M6 thread, with a PC4-M6 thread) How to print I printed it in PLA, 50% infill, no brim. Supports are required for the arm at the magnet holder and the hinge, as well as for the holder at the hinge. Additional parts Two 10x3 magnet