bambulab A1 printer carrying handle

Hi. I remembered about this project because the coil mount was broken. After buying the printer, I printed it out of PLA a year and a half ago, apparently the plastic became brittle and just broke from the weight of the coil. Therefore, always print the responsible parts from PETG. There are two options to choose from. The first one is with PTFE PC4-M6. The second one comes with the original PTFE mount that comes with the printer. You can also use a rotating coil from the AMS system or a simple original mount. Print recommendation: for the handle, there is a 0.4mm nozzle, a 0.2mm layer, 30% giroide filling, and a triple contour. for PTFE Nozzle 0.4mm, layer 0.12mm, triple contour, any filling for-spool adapter Nozzle 0.4mm, layer 0.2mm filling 20% mesh triple contour. Привет. Я вспомнил об этом проекте, потому что крепление катушки было сломано. После покупки принтера я распечатал его из PLA полтора года назад, видимо, пластик стал хрупким и просто ломался от веса катушки. Поэтому всег