BambuLab PTFE Guide V2

There is now a newer vesion available: https://makerworld.com/models/1448989Main purpose: To prevent the PTFE tube from scraping against the top glass.Advantages of this model:A lot more stability thanks to redesigned base.Large radius (about 38,125 mm).Light (3,9 g).Print recommendations:Scale to 102% for ABS (to compensate for shrinkage) - or use included .3mf fileThe top part needs supports. Its optimal printing orientation seems to be upside down.The bottom part doesn't need any supports.Assembly notes:Remove supports and smoothen the seam on the bottom piece.Assemble the two pieces together (requires quite a bit of force).Push the PTFE tube through the assembled parts.Connect the tube to the extruder.Slide this assembly down to the place of the original base and screw it in.