Bar table from IKEA Gerton tabletop

#### Idea
I had a leftover IKEA Gerton tabletop and wanted a bar table for my balcony, this is the result. I realize using metal parts from the hardware shop might be quicker and easier but this way we get to utilize our printers for something truly practical and useful.

>Sometimes the journey is the destination. ― Catherine Bybee

#### Instructions
Pretty straight forward; Print the parts, cut the wood to length and then screw everything together. Make sure you predrill all the holes before screwing the table together to avoid cracks.

I also stained the legs and treated the tabletop with boiled linseed oil.

#### BOM
##### Printed parts
* 5x bracket_tabletop_leg.STL
* 5x foot.STL
* 22x bracket_90deg.STL

##### Purchased parts
* 1x Tabletop, IKEA Gerton cut to 155x46 cm (155x75 original)
* 5x 950 x 45x45mm wood beam (i used fir)
* 2x 632 x 45x45mm wood beam
* 4x 260 x 45x45mm wood beam
* 124x 25 x 4mm wood screws

##### Optional
* Wood Stain