Barbie Drive-In

# Barbie Drive-In

Make your own Barbie style diorama with the drive-in screen and projector. [Video](https://youtube.com/shorts/A50qRGPbNX4?si=sAUqAXSFLGnvNdQd)

The screen houses a 3.5in LCD display and a raspberry pi zero. The projector houses an RGB LED. You can use the display enclosure or projector in other projects.

Web interface and rpi setup info is [here](https://github.com/jsinkers/barbie-drive-in-open).

NB not suitable for children due to small parts which may be a choking hazard.
 
## Hardware

- Raspberry Pi Zero 2W
- Waveshare 3.5in LCD display
- [duinotech RGB LED module](https://www.jaycar.com.au/arduino-compatible-rgb-led-module/p/XC4428)
- 4x M2x4 screws for the display enclosure
- 4x M2x6 screws for the projector

## Assembly - projector

- install cable for LED module (NB I desoldered the header pins and soldered wires directly to the module)
- push reels onto reel holder
- push reel holder into projector rear
- install lens in projector f