Barnowl Hueforge

A black and white Picture of an Owl i took as an Hueforge image. You can resize it but NEVER change the Z Axis !! Otherwise print as follows:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to Ivory White At layer #15 (1.28mm) swap to Gray At layer #16 (1.36mm) swap to Ivory White for the rest.