base Legs for the Atomstack P1

Elevation Support for Atomstack P1 with 2 Sizes and Threaded Fit First part: 60 mm
Second part: 44.85 mm

Printed on the K1C without supports, using a brim for better bed adhesion. I used a 5 mm screw (the original Atomstack P1 size), inserted into the hole of the part, then cut with a jeweler's saw to avoid damaging the threads, leaving a final length of 5 mm. Please double-check everything before printing — this is the first part I’ve ever shared, and I’m not experienced yet.