Basic box for Nixie Tubes Clock Arduino Shield

Easy printable, very basic box made for nice Nixie clock by GRA and AFCH
https://www.ebay.com/itm/Nixie-Tubes-Clock-Arduino-Shield-NCS314-8C-for-8pcs-IN-14-IN19-Nixie-Tubes/163214065577?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

Designed to print in one piece, or splitted for print on smaller printers.

Box needs to be printed upside down (the holes for tubes must lay on heatbed).
Bottom must be printed with holes for flathead screws laying on heatbed (the embos mark must be visible).

Resolution, perimeters and infill on your choice.
Prototype at pictures is splited and printed on Prusa MK3S, layer 0.15, 3 perimeters, 15% infill. https://youtu.be/3L-vZdXbaLo

For print in one piece you don't need to print the joint plates.
For easy split in slicer are on case and bottom embosed the marks and heights in mm.