BatCat Hueforge

Hello everyone!This is my first Hueforge print and the first print I'm publishing. I'm gradually testing my way through it to continually improve the quality and my knowledge of 3D printing.Feel free to test the print, and I'd really appreciate any comments and suggestions for improvement.Project: BatCat.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Base Thickness of 0.24mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 1.6mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 2 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.96mm) swap to Ivory White for the rest.