Bathroom Radio "SOAP DISH"

Bathroom Radio "SOAP DISH" DESCRIPTION: This radio was created specifically for the bathroom. In my home, it's mounted with double-sided adhesive tape. I later designed a mount that can be permanently mounted on the wall, allowing the radio to be placed in it or removed as needed. Multiple mounts can be printed and the radio can be moved to different locations. It can also be used without the mount as a portable radio, for example, by powering it with a power bank. Because the radio was designed to be simple, it has minimal external components: a USB-C port, one speaker, and a touchscreen display. The radio is turned on using a touch switch mounted inside the radio. Since the bathroom is humid, I wanted to avoid mechanical components. LIST OF ITEMS: ILI9341 2.8" 240*320 TFT LCD Display (e.g.) https://pl.aliexpress.com/item/1005006623369442.html 53MM 4 Ohm 3W Speaker (e.g.) https://pl.aliexpress.com/item/1005007331185845.html ESP32S3 N16R8 Chip (e.g.) https://pl.aliexpress.com/item/1005008786048447.html MAX98357 I2S Amplifier (3W) (e.g.) https://pl.aliexpress.com/item/1005008743704078.html Touch switch, e.g. https://pl.aliexpress.com/item/1005010293550863.html USB Type-C, e.g. https://pl.aliexpress.com/item/1005006044405766.html M2 8mm screws, e.g. https://pl.aliexpress.com/item/4001074924245.html Glue https://pl.aliexpress.com/item/1005007794285022.html ASSEMBLY: It's best to solder the electronic circuit before placing it in the enclosure. Then, program the circuit. This way, you can test its operation before final assembly. You can use your own software or use designs available online. I recommend this project https://github.com/VaraiTamas/yoRadio It works very well and is stable. The website includes instructions for connecting and programming. Next, we can print all the components. We place the display and speaker inside the case. I recommend mounting them with glue, but it's not required. Gluing will improve the case's seal. Then, we heat the plastic pins with