Batman and robin Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Grey Transmission Distance: 1 PLA BambuLab Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.3This print uses 6 unique filamentsSwap Instructions: Start with White At layer #8 (0.72mm) swap to Grey At layer #11 (0.96mm) swap to Marine Blue At layer #13 (1.12mm) swap to Yellow At layer #20 (1.68mm) swap to Red At layer #24 (2mm) swap to Black for the rest.