batman+capi america

Project: batman+capi america.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 176.86x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil marron Transmission Distance: 5 PLA smartfil rojo Transmission Distance: 7.1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA smatfil amarillo Transmission Distance: 5.8 PLA smatfil White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with negro At layer #12 (0.8mm) swap to marron At layer #13 (0.88mm) swap to rojo At layer #16 (1.04mm) swap to Blue Gray At layer #21 (1.36mm) swap to amarillo At layer #22 (1.44mm) swap to White for the rest.Proyecto: batman+capi america.hfpImprima al 100 % de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mmEl modelo mide 176,86 x 200 mmPuede imprimir con alt