Batman Cowl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used:PLA Overture Matte Black Transmission Distance: 0.1PLA Elegoo Red Transmission Distance: 4.2PLA PolyTerra Savannah Yellow Transmission Distance: 3.5PLA Overture Matte White Transmission Distance: 3.7This print uses 4 unique filamentsSwap Instructions:Start w